Injection-molded magnets (referred to as plastic magnets) are bonded magnets produced by mixing thermoplastic resin and magnetic powder into granules bonded magnets produced by injection molding.
| PropertyGrade | BNI-3 | BNI-4 | BNI-5 | BNI-6 | BNI-7 | BNI-5SR(PPS) | BNI-6SR(PPS) |
|---|---|---|---|---|---|---|---|
| Br (mT) Residual Induction(kGs) |
350-450 | 400-500 | 450-550 | 500-600 | 550-650 | 450-550 | 500-600 |
| 3.5-4.5 | 4.0-5.0 | 4.5-5.5 | 5.0-6.0 | 5.5-6.5 | 4.5-5.5 | 5.0-6.0 | |
| Hcb (kA/m) Coercive Force(kOe) |
200-280 | 240-320 | 304-360 | 328-384 | 344-400 | 320-400 | 320-400 |
| 2.5-3.5 | 3.0-4.0 | 3.8-4.5 | 4.1-4.8 | 4.3-5.0 | 4.0-5.0 | 4.0-5.0 | |
| Hcj (kA/m) Intrinsic Coercive Force(kOe) |
400-640 | 560-720 | 640-800 | 640-800 | 640-800 | 880-1120 | 880-1120 |
| 5.0-8.0 | 7.0-9.0 | 8.0-10.0 | 8.0-10.0 | 8.0-10.0 | 11.0-14.0 | 11.0-14.0 | |
| (BH)max (kJ/m3) Max. Energy Product(MGOe) |
20-28 | 28-36 | 36-44 | 44-52 | 52-60 | 36-44 | 44-52 |
| 2.5-3.5 | 3.5-4.5 | 4.5-5.5 | 5.5-6.5 | 6.5-7.5 | 4.5-5.5 | 5.5-6.5 | |
| ρ (g/cm3) Density | 4.5-5.0 | 4.5-5.0 | 4.5-5.1 | 4.7-5.2 | 4.7-5.3 | 4.8-5.3 | 4.9-5.4 |
| μr Recoil Permeability (μH/M) |
1.20 | 1.20 | 1.20 | 1.20 | 1.20 | 1.20 | 1.20 |
| (%/°C) Temperature Coefficient of Br |
-0.11 | -0.11 | -0.11 | -0.11 | -0.11 | -0.11 | -0.11 |
| Curie Temperature | 120 | 120 | 120 | 120 | 120 | 180 | 180 |
| Tw (°C) Max.Operating Temperature |
PA6 can operate at a maximum temperature of 150℃. The Tw of PA6 can reach 150℃ |
||||||
| Material | Anisotropic injection NdFeB | Anisotropic injection Ferrite | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Binder | PA12 | Pa12(PA6) | |||||||
| Grade | ANI-12 | ANI-15 | AFI-2 | ||||||
| Br (mT) Residual Induction(kGs) |
700-800 | 780-850 | 270-310 | ||||||
| 7.0-8.0 | 7.8-8.5 | 2.7-3.1 | |||||||
| Hcb (kA/m) Coercive Force(kOe) |
445-500 | 530-575 | 175-205 | ||||||
| 5.6-6.3 | 6.7-7.2 | 2.2-2.6 | |||||||
| Hcj (kA/m) Intrinsic Coercive Force(kOe) |
915-995 | 1155-1235 | 205-245 | ||||||
| 11.5-12.5 | 14.5-15.5 | 2.6 -3.1 | |||||||
| (BH)max (kJ/m3) Max. Energy Product(MGOe) |
92-100 | 116-124 | 14.7-18.7 | ||||||
| 11.5-12.5 | 14.5-15.5 | 1.8-2.3 | |||||||
| ρ (g/cm3) Density |
4.9-5.3 | 4.9-5.3 | 3.6-4.0 | ||||||
| μr Temperature Coefficient of Br |
1.1 | 1.1 | 1.1 | ||||||
| (%/°C) Density |
-0.13 | -0.13 | -0.19 | ||||||
| Tw (°C) Max.Operating Temperature |
100 | 120 | 120(150) | ||||||